Contaminations on the Surfaces of Swimming Pools
The accompanying substances in the bath water, in form of fat, lime and other dirt, form deposits on the walls of swimming pools.
During the yearly clean-up of such installations, these contaminations are eliminated from the surfaces manually with a cleansing product.
Sanosil® Clean SR - Product Description
The special cleanser Sanosil® Clean SR was especially developed for the cleaning and maintenance of swimming pools, baths and spas (surfaces). Through the application of the special cleanser Sanosil® Clean SR, the deposits on the surfaces are dissolved and, after the recommended contact period, can be washed away easily.
The costly manual cleaning procedure is thereby cut down to a minimum or may even become unnecessary.
Effectiveness
The chemically pure organic and inorganic acids contained in Sanosil® Clean SR, together with biologically degradable surfactants, are ideally suited to eliminate algae, iron, lime, manganese, fat and other deposits in a very short time
Application / Contact Period
Sanosil® Clean SR is applied manually to the surfaces of the swimming pool or with the low pressure sprayer Sanosil® Low-Press, equipped with a telescopic lance (for deep pools).After a period of contact of approx. 15 -30 minutes the dissolved deposits are rinsed with water. The rinsing water is then neutralized and evacuated.
Disinfection of the Bath Water
The ecological and effective disinfectants SANOSIL SUPER 25 and SANOSIL HWP offered by SANOSIL are the ideal solution to all disinfection applications in swimming pools.