Sanosil Measuring and Dosing
Sanosil Strips 200
The measuring strips Sanostrips 200 enable a fast determination of the SANOSIL®-disinfectant content in liquids.
Measuring range:
Excess SANOSIL® 0 - 100 mg/l (ppm)
SANOSIL® description: DES M 1/en
The measuring strips Sanostrips 200 enable a fast determination of the SANOSIL®-disinfectant content in liquids.
Measuring range:
Excess SANOSIL® 0 - 100 mg/l (ppm)
SANOSIL® description: DES M 1/en
Sanosil Sanostrips 100
The measuring strips Sanostrips 100 enable a fast determination of the SANOSIL®-disinfectant content and the pH value of liquids.
Measuring range:
Excess SANOSIL® 0 - 100 mg/l (ppm)
pH value: pH 6.5 - pH 7.9
SANOSIL® description: DES M 2/en
The measuring strips Sanostrips 100 enable a fast determination of the SANOSIL®-disinfectant content and the pH value of liquids.
Measuring range:
Excess SANOSIL® 0 - 100 mg/l (ppm)
pH value: pH 6.5 - pH 7.9
SANOSIL® description: DES M 2/en
Sanosil® Sanotest 200
The SANOSIL® Sanotest 200 operates according to the photometric principle.The change in colour, and thus the measurement of excess SANOSIL® disinfectant, is achieved by the addition of SANOX® reagent. pH measurement is achieved by the addition of PHENOLRED reagent.
Measuring range:
Excess SANOSIL® 0 - 200 mg/l (ppm)
pH value: pH 5.0 - pH .09
SANOSIL® description: DES M 8/en
The SANOSIL® Sanotest 200 operates according to the photometric principle.The change in colour, and thus the measurement of excess SANOSIL® disinfectant, is achieved by the addition of SANOX® reagent. pH measurement is achieved by the addition of PHENOLRED reagent.
Measuring range:
Excess SANOSIL® 0 - 200 mg/l (ppm)
pH value: pH 5.0 - pH .09
SANOSIL® description: DES M 8/en
Sanosil Sanobasic Timer
Sanobasic Timer programmable Dosing System.
Sanobasic Timer is a programmable dosing system with a built-in peristaltic pump for the simple dosing of Sanosil® Disinfectants in swimming pools or in industrial applications.
SANOSIL® description: DES M 03/en
Sanobasic Timer programmable Dosing System.
Sanobasic Timer is a programmable dosing system with a built-in peristaltic pump for the simple dosing of Sanosil® Disinfectants in swimming pools or in industrial applications.
SANOSIL® description: DES M 03/en
Sanobasic pH
Sanobasic pH, Automatic pH Measuring and Dosing System.
Sanobasic pH allows the continuous measurement and control of the pH value, as well as the corresponding product dosage by means of a peristaltic pump.
SANOSIL® description: DES M 04/en
Sanobasic pH, Automatic pH Measuring and Dosing System.
Sanobasic pH allows the continuous measurement and control of the pH value, as well as the corresponding product dosage by means of a peristaltic pump.
SANOSIL® description: DES M 04/en
Sanosil Kolormeter
The Sanosil® Kolormeter is used to determine automatically, through a timed analysis of titration the concentration of Sanosil® Disinfectants in aqueous solutions.
Working Principle - The concentrations are determined by titration, taking a sample of water to be analysed directly from the line only when the analysis is carried out. The determination of the end-point of the titration takes place directly through an optoelectronic colormetric sensor that measures the colour of the solution in the reaction chamber after the reagents in the suitable quantities have been added.
SANOSIL® description: DES M 53en
The Sanosil® Kolormeter is used to determine automatically, through a timed analysis of titration the concentration of Sanosil® Disinfectants in aqueous solutions.
Working Principle - The concentrations are determined by titration, taking a sample of water to be analysed directly from the line only when the analysis is carried out. The determination of the end-point of the titration takes place directly through an optoelectronic colormetric sensor that measures the colour of the solution in the reaction chamber after the reagents in the suitable quantities have been added.
SANOSIL® description: DES M 53en